Application:

• Automotive Handling
• Packaging
• Manufacturing
• General application

• The ISO Standard 5599-1 specifies an interface pattern for a common sub base valve consisting of pressure passages 1, 3,5, 2 & 4 and pilot passages 12 & 14.
• The width of the pattern and location of the 4 bolt holes are also specified.
• There are no specifications for the type of external electrical connection used to control the valve.

Size : 1, 2, 3

Valve islands can be easily assembled using the following procedure:

• Assemble the required valve island with the basic modules
• Mount the valve island on the machine together with any stand-alone valves and peripheral modules
• Select and install the required clip-on pneumatic and electrical connectors

Moduflex Valve Islands offer the greatest flexibility for your design requirements. Valve Modules are available as 4-Way or 3-Way valves and can be ordered as single or dual valves. A Single Valve Module has one valve in one valve body. A Dual Valve Module will have 2 valves in one valve body. Each Valve in the Dual Valve Body is controlled by a solenoid or air pilot and can be operated independently from the other valve in the same body. There are no dimensional difference between a single and a dual valve. Flow Rates are reduced on the dual valves. Single valve modules offer Ceramic Slide Valve Technology while dual valve modules offer WCS – Wear Compensation System Technology. Both offer low friction shift forces, fast response and less spool wear. Valve Modules are available in two different valve body sizes. Size 1 and Size 2 Valve Modules can be combined in both “T” and “V” Series Valve Islands without transition kits.

Features:

• It allows for potential problem-solving like no other material.
• This tubing allows wide coverage of very demanding applications not only in the field of industry, but also in laboratories, in the food industry and in medical environments. Our range of PFA tubing covers a broad range of working temperatures, from cryogenic to extremely hot (+260°C) and of pressures (up to 35 bar) 
• This range is FDA-approved and the clear version meets the requirements of USP class VI. 
• This tubing is available in stock in the metric version, from diameters 4 mm to 12 mm (1 mm thickness) and in protective Tube pack ® packaging;
• It is also available upon request in other diameters and thicknesses. 
• The PFA Tubing documentation is available here and on the Parker EMDC e-module (LEAF/0508/EN).

We also offer One Touch Fittings with wp2 series (sizes ø4, 6, 8, 10, 12, 14 and 16mm)

Features of the fittings are as follows:

• Attractive design
• Compact size
• Threaded nipples of l,t and y fittings enable plastic portion to turn by 360 degree
• Full area of the inner bore of the tubing is available for flow of fluid
• Bubble tight sealing of tubes
• Suitable for both nylon and pu tubing
• Easy and quick push in connection of tube/easy removal of tube by simple pressing of collet cap
• New design stainless steel collet
• Teflon pre coated male taper threads
• Maintenance free and long life
• The fitment and function of tubes are not affected by vibrations due to positive gripping of the tube by the collet

Nipples
wn series (sizes m5, 1/8, 1/4, 3/8, 1/2, 3/4, 1)

• Wide variety of nipples available
• Nickel plated brass body
• Male (r) taper threads with thread sealant coating, male parallel threads with sealing washer (m5 only)