Product Range
Autorotor
Rotary Indexing Table
Our clients can avail from us a premium range of Rotary Indexing Table that finds application on Special Purpose Machines for repeated positioning & precision indexing. This Autorotor Rotary Indexing Table series 5 is a automatic square axis unit to convert the uniform rotation of inlet shaft in an recurrent rotation of output disk. It is based on the principle of conjoining indexing and locking in a non-lifting system of face gear rings.
The number of standard indexing ranges from 2 up to 32. From 32 up to 540 indexing on request.
Indexing tables are generally mounted on:
- Assembling machines
- Packing equipment
- Manufacturing equipment
- Automated welding machines
- Movement devices
- Machining isles
- Filling machines
- Printing machines
Benefits:
- Housing of uninterrupted round shape, without peripheral protrusions. Underslung drive train. Simple mounting into plain round aperture
- Great rigidity, by virtue of locking into face gear rings of largest possible diameter
- High indexing accuracy up to ± 1"
- Very fast indexing - even with heavy table loads
- Constant monitoring of actual angular table position via rotary resolver - no need for zero-datum reference approach
- Version with both horizontal and vertical indexing table
- A thoroughly tried technology ensures highest service reliability
Manipulators
We offer precision engineered Mechanical rotary and linear manipulators that are offer solutions for moving and locating of pieces at high speed. This range which is created with positive movement, where masses are controlled in acceleration and deceleration, allows uniform transfer, without shocks and vibrations, up to 120 cycles/min. Linear manipulator horizontal stroke can be adjusted from 75 to 200 mm., while vertical stroke can be adjusted from 30 to 75 mm.
Specifications:
- Rotary manipulator standard angular displacement can be of 30° - 60° - 90° - 120° - 180°
- Vertical stroke range from 40 to 180 mm.
- On request, Autorotor can also supply motor drives for its products.
- This material (reduction units, self-braking motors or dynamic brake motors, brake-clutch units, converters, etc.) is supplied by very well-known trademarks.
- Obviously, Autorotor follows customer's requirements for a specific trade mark
Benefits:
- The manipulator is a unit which converts mechanical rotating uniform shaft of entry into rectilinear movement of the horizontal run and vertical, through a trio of cam drum, whose shape determines the type of cycle that is executed.
- It is normally used as an accelerator of pallets. It can carry heavy loads (up to 70 kg).
- Manipulators MLE are mechatronic units powered by linear motors, so by electric motors where rotor and stator are not "rolled up", but "unrolled", and generate a linear force instead of a torque.
- Contrary to the mechanical manipulators, motion is not transmitted by cams or mechanical gears, but by induced electromagnetic forces; thus also the mechanical wear is close to nil.
Oscillating High-Speed Drive
We offer Oscillating High-Speed Drive that is a mechanical square axis device whose operating principle is almost the same as the IT series. Their unique manufacturing features make them a class of products apart. Their speed can reach 700/800 cycles/min. (excellent speed for tablet press, high speed press/shears feeder, etc.), although featuring high repeatability and absence of vibrations which are peculiar to Autorotor production.
Applications:
- Assembling machines
- Packing equipment
- Manufacturing equipment
- Automated welding machines
- Movement devices
- Machining isles
- Filling machines
- Printing machines
Features:
- High speed with full control of the out-put shaft rotation: 700 cycles/min can be considered as an average (though it depends heavily on the inertia of the application and the stations number).
- Short cam angle even with few stations.
- Standard divisions: 2 to 36.
- Most suitable motion law for specific customer's need.
- Barrel cam heat treated and ground on the helix (profile)
- Self-locking in dwell position.
- No vibrations.
- Can rotate equally well clockwise or counterclockwise.
- Very low maintenance.
- Very low power installed.
- High repeatability: ± 0.01 mm on cam followers' working
Servo Driven Index Table
We offer a very flexible and intelligent range of Servo Driven Index Tables that are featured with Rotary union for the supply of Hydraulic or pneumatic pressure to the clamps on the fixture. The top is, completely automated by means of a PC, PLC or a devoted panel. It is possible to set the position of rotation, the rotating speed and the acceleration ramp. The servomotor which moves the table is driven by a digital gear with incorporated axis card. Our Servo Driven Index Table provides mechanism of both rotary and linear motors. The device can be used for gearing applications.
Features:
- Intelligent brushless servo drive with integrated motion controller
- 16 user defined preset positions - expandable to 256 with option I/O card
- Control of both rotary and linear servo motors
- Direct online single-phase 115/230 VAC, from 2.5 to 7.5A continuous
- Direct online 3-phase 230-460 VAC, from 2.5 to 27.5A continuous
- Option of external 24VDC input to maintain control electronics during power down
- Panel-mounting enclosure
- 7 segment display for diagnostics
- Resolver, incremental encoder and absolute (EnDat) feedback options
- Simulated encoder output
- Master encoder input for gearing applications
- Auto-tuning wizard and software oscilloscope facilities via Windows front end
- Analog or pulse and d irection command reference
- 8 uncommitted opto-isolated digital inputs
- 2 of the inputs can be programmed to capture the axis position within 1 microsecond.
- 3 uncommitted opto-isolated digital outputs (PNP)
- 1 x analog input - 14-bit differential for command reference or general purpose
- I/O expansion (factory fit option): 10 digital inputs/5 outputs